Saturday, February 28, 2026

Chapter 7: Parallel Circuits

 

Characteristics of a Parallel Circuit

In a parallel circuit, components are connected between the same two nodes, providing multiple paths for current flow. The same voltage appears across all parallel branches, but the current divides among them.

Key properties: (1) Voltage is the same across all parallel branches: V_T = V₁ = V₂ = V₃ = ... (2) Total current equals the sum of branch currents: I_T = I₁ + I₂ + I₃ + ... (3) Total resistance is less than the smallest individual resistance: 1/R_T = 1/R₁ + 1/R₂ + 1/R₃ + ...

 

Calculating Parallel Resistance

For two resistors in parallel, the formula simplifies to: R_T = (R₁ × R₂) / (R₁ + R₂). This is often called the 'product over sum' formula.

Example: A 100 Ω and 300 Ω resistor in parallel: R_T = (100 × 300) / (100 + 300) = 30000 / 400 = 75 Ω

Notice that 75 Ω is indeed less than the smaller resistor (100 Ω). Adding any resistance in parallel always decreases total resistance and increases total current draw from the source.

 

Current Divider Principle

Just as series circuits divide voltage, parallel circuits divide current. The current divider formula for two parallel resistors is: I₁ = I_T × (R₂ / (R₁ + R₂)). Note that the resistor in the denominator is the other resistor, not R₁. Larger resistance attracts less current — this is the key insight of the current divider.

Parallel circuits are the standard configuration for household electrical wiring. All appliances plug into sockets wired in parallel, ensuring each device receives the full mains voltage regardless of how many other devices are connected.


 

Chapter 6: Series Circuits

 

Characteristics of a Series Circuit

A series circuit is one in which all components are connected end-to-end in a single path, so the same current flows through each component. There is only one path for current flow. If any component fails open (breaks), the entire circuit stops conducting.

The key properties of a series circuit are: (1) Current is the same through all components: I_T = I₁ = I₂ = I₃ = ... (2) Total resistance is the sum of all individual resistances: R_T = R₁ + R₂ + R₃ + ... (3) Total voltage equals the sum of individual voltage drops (Kirchhoff's Voltage Law): V_T = V₁ + V₂ + V₃ + ...

 

Voltage Divider Principle

One of the most practically important properties of a series circuit is the voltage divider. When resistors are connected in series across a voltage source, the voltage distributes across each resistor in proportion to its resistance value.

The voltage divider formula: V_X = V_T × (R_X / R_T) where V_X is the voltage across resistor R_X and R_T is the total series resistance. This principle is used extensively in sensor circuits, reference voltage generation, and signal conditioning.

Example: Two resistors, 10 kΩ and 20 kΩ, in series across 12V. The voltage across the 20 kΩ resistor = 12 × (20k / 30k) = 8V

 

Practical Applications of Series Circuits

Series circuits are used for current-limiting (a series resistor limits current through an LED), fuse protection (a fuse in series breaks the circuit on overcurrent), voltage division, and battery configurations (cells in series add their voltages). Christmas lights using older technology wired all bulbs in series — the characteristic that caused one blown bulb to darken the entire string.